**Ordering teak furniture “from Bali” almost always means buying solid Jepara teak coordinated through a Bali-based sourcing office, then shipping a FOB container out of Semarang or Surabaya. You send an item list, approve samples and specs, confirm a quote, and a workshop builds, kiln-dries, and loads your mixed container.**
Buyers who search “how to order teak furniture from Bali Indonesia” usually picture one island doing everything. In practice the work splits: Bali handles English-language coordination and branding, Jepara does the carving, and Central Java’s ports do the loading. Here is how the pieces fit together.
Why is teak “from Bali” actually built in Jepara?
Bali is Indonesia’s furniture showroom. Galleries around Kerobokan, Seminyak, and Gianyar display finished pieces, and many exporters register their offices there. But solid teak — jati, in Indonesian — is worked in Jepara, a carving town in Central Java roughly 500 km northwest of Bali across the Bali Strait.
A Bali sourcing office gives a remote buyer three things: someone who answers email in a workable window, a QC contact who can visit Jepara workshops, and a consolidation point for loading. The joinery, kiln-drying, and finishing still happen in Jepara.
What are the actual steps to order from Bali?
The path from first enquiry to loaded container is fairly standard. The timings below are typical ranges, not promises — they move with order size and season.
| Step | What happens | Typical timing |
|---|---|---|
| 1. Item list | You send a spec sheet or catalogue picks | Day 1 |
| 2. Quotation | Per-piece quote against your list | 2–5 days |
| 3. Sampling | Photos, video, or a physical sample | 2–4 weeks |
| 4. Deposit + PO | Confirm specs, grade, finish, quantities | — |
| 5. Production | Cutting, joinery, kiln-drying, finishing | 45–75 days |
| 6. QC + loading | Inspection, then stuffing the container | 3–7 days |
| 7. Sailing | FOB port to your destination | 25–40 days by sea |
Most first-time buyers build a shortlist and a moodboard before they order teak furniture from Bali, because a clear item list is what turns a vague enquiry into an accurate quote.
How do you coordinate the order remotely?
Almost everything runs on email, WhatsApp, and shared photo folders. The sourcing office sends production photos and short clips at cutting, assembly, and pre-finish stages, so you catch problems before the finish goes on.
When you specify an order, pin down:
- Grade — A (heartwood, tighter grain, more uniform colour) or B (includes some sapwood and knots, lower cost)
- Moisture content — kiln-dried teak usually runs 8–12% MC; ask for it in writing if your climate is dry
- Construction — solid vs finger-jointed panels, joinery type, hardware
- Finish — raw sanded, natural oil, or a specified coating
- Dimensions and tolerances — in the units you actually use
Grade A heartwood costs more and photographs cleaner; grade B is honest value for painted or heavily weathered looks. Neither guarantees how a piece will age outdoors — teak is durable, but weathering depends on climate, finish, and care.
Which documents travel with a teak container?
Teak is regulated timber, so paperwork matters as much as joinery. Indonesia’s SVLK (Sistem Verifikasi Legalitas Kayu) is the mandatory national timber-legality system, compulsory for timber-industry operators since January 2013, and it traces wood from origin through the supply chain to export.
A few points buyers ask about:
- Since 1 January 2013, timber exports must carry a V-Legal Document; since 1 January 2015 nearly all wooden furniture (except bamboo) needs a V-Legal/SVLK export licence.
- Indonesia was the first country to issue FLEGT licences, from November 2016. A FLEGT-licensed shipment automatically meets the EU Timber Regulation, so an EU importer can place it without extra due-diligence risk work.
- The EUDR (EU Deforestation Regulation, adopted 2023) adds a separate bar: goods must be deforestation-free after the 31 December 2020 cut-off, with geolocation and due-diligence statements. SVLK or FLEGT alone do not by themselves satisfy EUDR, and full application phases in around end-2026 — a real 2027 concern for EU buyers.
Documentation can be prepared, but acceptance always rests with customs and competent authorities. Treat clearance as something you plan for, not something anyone can guarantee.
How does port and container logistics work?
Even when you buy “from Bali,” most full containers load from Central or East Java, because that is where Jepara sits.
| Loading option | Location | Notes |
|---|---|---|
| Tanjung Emas | Semarang | Closest major port to Jepara; common FOB point |
| Tanjung Perak | Surabaya | East Java alternative for some routes |
| Benoa | Bali | Used mainly for smaller Bali-consolidated loads |
Order size is measured in cubic metres. A 20-foot container gives roughly 28–33 CBM of usable space; a 40-foot high-cube gives about 67–76 CBM. A first order is usually a mixed container that cubes out — enough different items to fill the volume rather than one repeated piece.
How is the price quoted, and what do the numbers mean?
Teak furniture pricing is quote-based, per piece and per spec. No government source publishes fixed FOB prices, so any figure is a commercial quote against your item list, not a set rate.
The indicative examples below are illustrative only — as of 2026, subject to change — and move with grade, construction, finish, and how tightly the container cubes:
| Example item | Indicative FOB range (USD) |
|---|---|
| Teak dining chair | 35–70 |
| Solid teak dining table | 300–650 |
| Outdoor lounge set | 700–1,500 |
Read those as rough context, not a price list. A real quote comes from your actual specs — grade A vs B, joinery, finish, and quantities — priced by Jepara workshops and consolidated into one FOB container.
Frequently Asked Questions
Can I order teak furniture from Bali if my container ships from Java?
Yes, and it is the norm. A Bali sourcing office coordinates your order and quality checks, while the container itself usually loads at Tanjung Emas in Semarang, the closest major port to the Jepara workshops. Smaller consolidated loads sometimes leave from Benoa in Bali. Your documents and FOB terms name whichever port actually stuffs and ships your goods.
How small can my first teak furniture order from Bali be?
The practical floor is a mixed container that cubes out — enough items to fill roughly 28–33 CBM in a 20-foot box. You rarely order a single design; you combine tables, chairs, and outdoor pieces to reach volume. Below a full container, some sellers arrange LCL groupage, but per-unit cost and handling risk rise, so most buyers aim for one full load.
Do I need to visit Bali or Jepara in person to place an order?
No. Most orders run entirely on email, WhatsApp, shared photo folders, and stage-by-stage production video, so remote buyers coordinate everything from abroad. A first visit helps you judge grade and finish in person and meet the sourcing team, but it is optional. Many buyers inspect through a local QC contact and only travel once the relationship is established.